Filter
Top Products
25
System Menu (Video/S-Video)
If the projector cannot reproduce a proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Video or S-Video
Component 1 or 2
The projector automatically detects the incoming video system
and adjusts itself to optimize its performance.
When the video system is PAL-M or PAL-N, select the system
manually.
Input
Select the Input Menu with the Point ed buttons and press
the Point
8 or OK buttons to access the sub-menu items.
Use the the Point ed buttons to select an input source and
press the OK or Point
8 buttons. The selected item will be
check marked.
1
2
When the video input signal is connected to the VIDEO or S-
VIDEO jacks, select Video or S-video respectively.
Menu Operation
Input Menu
When the video input signal is connected to the Y-Pb/Cb-Pr/Cr
jacks, select Component 1 or 2.
The projector automatically detects the incoming video signal and
adjusts itself to optimize its performance.
3
When selecting Video or S-video, press the Point 8 button to
display the System Menu.
4
Use the Point ed buttons to select the desired system and
press the OK or Point
8 buttons.
Video
Input
Auto
The currently set item
is check marked.
Press the Point 8 button
to display the System
Menu.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
5
When selecting Computer, press the Point 8 button to
display the Source Select Menu.
6
Use the Point ed buttons to select the desired source and
press the OK or Point
8 buttons.
Use the Point ed buttons
to select the desired
system and press the OK
or Point 8 buttons.
Quit
Exit this menu.