Sanyo POA-PN03C Network Card User Manual


 
44
Chapter 3 Basic Setting and Operation
Up to 99,999 hours can be set for the time setting.
If condition "When Auto Play is failed" is checked, the trap is sent when occurring the error during the
auto display operation using with the network viewer function (+p.98). For further information of the
error, refer to item "Auto Display setting and control page [3]"((+p.101).
Trap option
Trap option setting
Tick check boxes in front of the condition item to send the
trap.
Click Set button if you tick or un-tick the check box on a page.
[1]––––––––––––––––––––––––––––––––––
o When PJ lamp is off.
o When PJ lamp replacement time is reached.
o When internal PJ power circuit is failed.
o When internal PJ temperature is too high.
o When PJ is turned into Standby in proper user opera-
tion.
[2]––––––––––––––––––––––––––––––––––
o When Power management function turns PJ lamp
off.
o When the signal is interrupted.
o When Auto Play is failed.
o When lamp Corres. Value reaches
[ ] hours.