Filter
Top Products
75
PJ-NET ORGANIZER
OWNER'S MANUAL [XP57 Series]
ENGLISH
Using the Real Time Capture
Select input mode to "Network" previously.
1 Select "Network Capture" icon from "Network" menu. Press SELECT button on the pro-
jector twice to display the network capture setting pallet.
2 Select PC number to connect .
3 Select "Connect" and then press SELECT button to start capturing. The screen image of
the selected computer will appear on the projected screen in real time.
4 To end capturing, select "Disconnect" and then press SELECT button.
PC4PC3 PC6
Capture
PC5
PC2
PJ2
PJ1
PC1
* PC provides the Network Capture.
Project a screen
image of PC1 with
PC2.
* Start capturing of
the PC1 from the
projector PJ2.
[3] Control by the projector
✐ The IP address of the connecting PC should be registered previously (+ p.72).
✐ If the error message appears, check item "Parameter set up" (+ p.71).
✐ Selectable computer from the projector is PC1 to PC10. Other PCs cannot be selected from the
projector.
✐ The projector does not provide the function to register the IP address of the computer and to set
the parameter of the capturing. They should be registered by using the web browser previously
(+ p.71-72).
Set "On" when
using the wireless
mouse function