Filter
Top Products
91
PJ-NET ORGANIZER
OWNER'S MANUAL [XP57 Series]
ENGLISH
Setting of output destination and conversion mode
When clicking Change button on the confirma-
tion window in the step 3 on the previous page,
following option setting window appears.
Output destination
Select either Folder or FTP server as the output
destination of the converted files.
Folder
Output folder ..... Specify a folder in the local hard disk
or shared computer in the network
FTP server
Host name ............ Enter host name or IP address of the
FTP server
Root Folder .......... Specify the root directory of the FTP
server. Normally use "/".
User ID .................... Enter your login account of the FTP
sever.
Password ............... Enter your password of the FTP server.
Output folder ..... Specify a directory of the FTP server.
Conversion mode
Resolution ............ Selects output image resolution (VGA to SXGA+)
✐
The image resolution higher than the projector's panel resolution cannot be dis-
played.
Image rotation
.....
Selects image rotation (0, 90, 180, 270).
Conversion Type
Fit ............................. Converts as either width or height of
the image sets to be the maximum
screen width or height.
Justify
[both ends] ............... Converts as width of the image sets
to be the maximum screen width.
Justify
[top and bottom] ..... Converts as height of the image sets
to be the maximum screen height.
Cut ........................... Cuts image with the screen size not depending on the image size. This type has fol-
lowing mode.
✐ Select this mode when you want to have the images with the original size. Select
each mode by clicking on the button.
Image Quality ....
Selects an image conversion quality with "High", "Mid" or "Low".
Creating the available data [Network Viewer 3]