Filter
Top Products
84
Chapter 5 Network Capture
Network Communication operation and change of state
Network Communication can be used under the environment which one or more com-
puters are connected to the projector via the network.
Preparation
Launch the Network Capture 3 software on the target computer (+p.70). Set the projector
in the standby or turning on. Check IP address of the target computer is registered in the
connection list (+p.78).
Operation on the Main PC Operation on the Sub PC
On the Communication
z
Executing the command "Start Communication".
➔ The capture editing window appears on the
screen. The icon on the task bar is activated.
Frame
➔
The icon on the task bar is activated to
let users know that the captured image is
now serving.
z Executing the command "Start Editing".
➔ The capture image on the Main PC
appears on the screen.
Frame
R B
x
Editing the capture image using with the tools.
➔ The editing information is automatically
transferred to the Sub PC.
R
➔ The editing information on the Main PC is
reflected on the Sub PC.
B
c Releasing the editing authority.
➔ The color of authority status frame changes green.
G
➔ The color of authority status frame chang-
es green.
G
➔ The color of authority status frame changes blue.
B
x Acquiring the authority.
➔ The color of authority status frame chang-
es red.
R
➔ The editing information on the Sub PC is
reflected on the Main PC.
B
c Editing the captured image using with the
tools.
➔ The editing information is automatically
transferred to the target PC.
R
➔ The color of authority status frame changes green.
G
v Releasing the editing authority.
➔ The color of authority status frame chang-
es green.
G
v Acquiring the authority.
➔ The color of authority status frame changes red.
R
➔ The color of authority status frame chang-
es blue.
B
b Repeat steps x, c if required.
b Repeat steps x to v if required.
n Executing the command "Capture transfer".
➔ Updating the editing window with a new
captured screen image.
R
➔ A new captured screen image appears on
the editing window.
B
m Repeat steps x to b.
, Ending the communication.
➔ The capture editing window disappears.
R
➔ The capture editing window disappears.
✐ The projector projects the edited captured image on the screen when the input mode of the pro-
jector is set "Network".
✐ The command "Save Communication" can execute in any of the mode even if not having the
authority.
✐ The arrow (➔) shows a response to the command executed.
✐ The execution of the command "End Communication" or "End Editing" on the Sub PC has no
effect on the other target computers.