Filter
Top Products
Name and Function of Each Part
CLASS 2 WIRING
PC CARD
RS-232C
ALARM IN OUT
MODEM
PC
AC24V
DC12V
GND
1 2
ETHERNET
POWER
MONITOR
OUT
8
H
G
JF
I
9
COMD/N IN
8
Link indicator
This indicator illuminates when the camera is
connected to a network. It flashes while data
transmission is in progress.
The indicator switches off when the camera
is connected to a wireless LAN.
9
Alarm/D/N (Day/Night) terminals
A
ALARM IN terminal (IN)
Connect this terminal to an infrared
sensor or similar use in external detection
of intruders.
B
D/N IN terminal (D/N IN)
This can only be used when COLOR
mode is set. A device such as an infrared
sensor can be used to automatically
switch between color images and black &
white images.
C
ALARM OUT terminal (OUT)
Connect this terminal to a buzzer or lamp
that is used to warn when an alarm is
detected by means of motion sensor or
alarm input. In addition, when the day/night
function (COLOR mode or TIMER mode) is
being used, an IR lamp or other device can
be made to illuminate when monitoring
switches to black & white images. (Output
rating: 18 V, 25 mA)
D
Ground terminal (COM)
F
Power supply input terminals
(AC24V, DC12V, GND)
G
RS-232C connector
Use this connector to connect the camera to
a modem for transmission of data along
telephone lines, or for connecting the camera
to a computer.
Use the PC/MODEM select switch to change
the camera operation between modem and
computer operation.
H
ETHERNET connector
Use this connector to connect the camera
directly to a computer or to a network. Use a
10Base-T or 100Base-TX (Category 5, UTP)
cable to make the connection.
I
Lens iris output connector
Connect this connector (4-pin socket) to the
lens iris plug of the automatic iris-type lens
(sold separately).
J
PC/MODEM select switch
Use this switch to set the function of the
RS-232C connector when connecting the
camera directly to either a modem or
computer.
Note:
•
Make sure that the camera’s power is turned
off before setting the function of the RS-232C
connector.
•
Using the RS-232C connector to connect the
camera to a computer is only done for
service purposes. You should not use the
PC/MODEM select switch yourself.
ALARM IN OUT
A
B
C
D
COMD/N IN
L5AM2/US (VCC-WB4000) GB 2003, 6, 6
– 6 –
English