SATO 412E Label Maker User Manual


 
Section 1: Introduction
LM Basic 408e/412e Operator’s Manual Page 1-5
1.1 GENERAL SPECIFICATIONS (CONT’D)
Specification/
Model Name
LM408e and LM412e
Interface Characteristics
External connectivity
(Slot 1)
Interface board
¤ Parallel (IEEE1284)
¤ RS-232C
• READY/BUSY
• XON/XOFF
• Status 2/3
• Driver specific protocol
• Status 5
¤ USB (Ver. 1.1)
¤ LAN (10BASE-T/ 100BASE-TX automatic changeover)
¤ Wireless LAN (IEEE802.11b)
Configuration and Functions
User settings (via LCD) 1. Settings indications
2. Print speed
3. Print darkness
4. Print position adjustments
5. Zero slash changeover
6. Proportional pitch adjustments
Operation
Panel
Buttons
LINE, FEED
Switch POWER ON/OFF
LCD Backlit green LCD, two-line 16-character alphanumeric display
LED(s) STATUS
Adjustment
Potentiometers
PITCH: print position adjustment
OFFSET: dispense adjustment
PRINT: print darkness adjustment
Other
Functions
Status Monitor function
Commands for drawing of graphics
Sequential numbering
Outline and Outline variations
Label Skip
Line Print
Form Overlay
Storage of Formats
Storage of Customized Font Characters in memory
Reverse printing function (White text on a black background)
Function for printing of lines and boxes
Label format storage function
Zero-slash character switching, HEX Dump Print function, Calendar option.
DIP Switches One 8-bit DIP switch
Programming Language SATO Barcode Printer Language Ver 4.1
Automatic diagnostics Head check function (for detection of failed heating elements in the print head)
”Paper-End” detection
“Head Open” detection
Test Print
Ribbon End detection
Ribbon Near End detection
Calendar Check (if optional Calendar chip is installed)