SATO 412E Label Maker User Manual


 
Section 3: Configuration and Operation
LM Basic 408e/412e Operator’s Manual Page 3-15
3.7 COUNTERS MODE
3.7.1 Counters
In this mode, pressing the LINE button brings you to the Motion
Mode settings. Otherwise, press FEED to proceed to adjust the
behavior of the built-in counters.
In the following screens of Counters Mode, you can choose between the Head Counter or Life
Counter, see the Head Counter value, clear the Head Counter, and see the Life Counter value.
3.7.2 Counter Select
In this screen you can select between the Head counter (HD) or Life
counter (LIFE).
Use the LINE button to select either counter, then press the FEED
button to confirm the setting and proceed to the next setting screen.
3.7.3 Show Head Counter
This screen shows the distance of label printed by the print head.
Press the FEED button for the next screen.
3.7.4 Clear Head Counter
In this screen, you can reset the Head Counter value to 0 by
selecting YES. Otherwise, select NO. The default setting is NO.
Press the FEED button for the next screen.
3.7.5 Show Life Counter
This screen shows the distance of label generated by the printer in
total.
Press the FEED button for the next screen.
COUNTERS MODE
COUNTERS
HD LIFE
HEAD COUNTER
X. XM
HEAD COUNT CLEAR
YES NO
LIFE COUNTER
X. XM