Filter
Top Products
WLa Font type. Specifies the 28W x 52L dot matrix font (including
decenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 4-40
XM Font type. Specifies the 24W x 24H dot matrix font (including
descenders).
Page 4-34
XS Font type. Specifies the 17W x 17H dot matrix font (including
descenders).
Page 4-34
XU Font type. Specifies the 5W x 9L dot matrix font (including
descenders).
Page 4-34
XLa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 4-40
XBa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 4-40
YC Cut Last. Cuts last printed label and retracts head to print position. Page 4-33
YEa Label/Tag Select. Selects the operation of the “Paper Out” signal.
a = 0 Label selection. Print tops upon detection of Paper Out.
1 Tag selection. Print stops after label is printed.
Page 4-51
Z Stop Code. Ends all print jobs. Page 4-70
%a Rotate. Fixed Base Reference Point. Rotates printing in 90°
increments without changing the base reference point.
a = 0 Sets print to normal direction
1 Sets print to 90° CCW
2 Sets print to 180° rotated (upside down)
3 Sets print to 270° CCW (90° CW)
Page 4-67
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
SATOCT SeriesPrinters9001069A Page A-9