SATO GL 4xxe All in One Printer User Manual


 
10
I
ntro
d
uct
i
on to t
h
e
RFID
con
fi
gurat
i
on opt
i
ons
Tag Write Cnt
Displays the number of tags attempted to be written since the last Clear Tag Stat operation was initiated.
(See “Clear Tag Stat”.)
Failed Tag Cnt
Displays on the LCD the number of failed tag write attempts since the last Clear Tag Stat operation has
been initiated. (See “Clear Tag Stat”)
Tag Read Cnt
This menu item displays the number of tags read since the last Clear Tag Stat. (See “Clear Tag Stat”)
Non-RFID Warning
When set to Enable, this option causes the printer to check to make sure that non-RFID jobs are not
being printed on RFID labels (to prevent RFID labels from being wasted).
If RFID labels are installed in the printer, and a job is printed with at least one form that contains no RFID
commands, a fault will be declared and the data for the forms that contain no RFID commands will be
absorbed.
The default is Disable.
Tag Void Cnt
Always displays 0 unless the RFID encoder is used with an attached Online Barcode Validator (OBV).
When used with a validator, Tag Void Cnt represents how many valid RFID tags were overstruck due to
bad barcode scanning.