Filter
Top Products
14
Write Power
This menu item selects the write power level to be used in the RFID encoder. 1 is the lowest power level
setting, and 20 is the highest. The default is 6.
Read Power
This menu item selects the read power level to be used in the RFID encoder. 1 is the lowest power level
setting, and 20 is the highest. The default is 5.
EPC Byte Length
This menu item selects the number of bytes in the tag. The default is 12.
EPC Address
This menu item selects the starting location of the EPC block within the RFID tag memory. The default is
0.
USR Byte Length
This menu item selects the size of the USR block within the RFID
tag memory. The default is 0.
USR Address
This menu item selects the starting location of the USR block within the RFID tag memory. The default is
0.
TID Byte Length
This menu item selects the size of the TID block within the RFID tag memory. The default is 8.
TID Address
This menu item selects the starting location of the TID block within the RFID tag memory. The default is
2.
Block Write Len
This menu item selects the maximum number of bytes written to the
USR block within the RFID tag memory at one time. The default is 8.
Introduction to the RFID configuration options