Filter
Top Products
Unit 1: Introduction
S8400 Series Operator Manual
1-2 PN: 9001160B
ABOUT THIS MANUAL
This manual is laid out consistent with the product discussed and provides all of the information required for
general printer configuration, operation, troubleshooting, and maintenance. For specialized programming, refer to
the Programming Reference document.
Step-by step maintenance instructions are provided with typical problems and solutions. Become familiar with each
unit and section before installing and maintaining the printer.
This manual also incorporates the use of special information boxes. Examples of these boxes and the type of
information provided in each, are below.
A comprehensive Table Of Contents provided at the front of this manual facilitates rapid movement within. The
contents identify the different Units, Chapters, and some Sections. Each references the page number of their
commencement.
The pages of this manual have embedded headers and footers to assist the user in identifying his or her exact
position within the manual. The header provides the unit number followed by its name. The footer identifies the
product on the left, the page number in the center, and the manual’s part number to the right side of the page.
Page enumeration is two-part with each separated by a hyphen. The first character set references the Unit and the
second identifies the page number within that unit. Page numbers begin with the numeral one (1) at the beginning
of a new unit and ascend sequentially.
WARNING: PROVIDES INFORMATION THAT, IF UNHEEDED, MAY RESULT IN
PERSONAL INJURY.
CAUTION: PROVIDES INFORMATION THAT, IF UNHEEDED, MAY RESULT IN
EQUIPMENT DAMAGE.
ATTENTION: Provides information that is deemed of special importance but will not
result in personal injury or product damage if unheeded.
NOTE: Provides helpful hints to assist in performing the tasks at hand.
LCD DISPLAY: Provides the specific display that should be visible on the LCD at that
point.
ATTENTION: The illustrations and graphics provided in this manual may display
components, assemblies, and purchase options that may not be present on idividual
printers. However, where those instances arise, they are not revalent to the topic
discussed.