Filter
Top Products
Unit 4: Printer Configuration
S8400 Series Operator Manual
4-39 PN: 9001160B
This screen only appears if CARTRIDGE was selected in the first screen and prompts to confirm
that the CF Card has been installed and setup for use.
Confirms theprinter is on standby for receiving data.
Screen confirms that downloading is in process and displays its progress status. A tinted field will
move laterally from the left toward the right as downloading progresses. When the tinted bar
reaches 100 on the scale, downloading is complete.
This menu screen appears when all of the data has been received and the process is complete.
Also prompts the operator on how to proceed.
PRINT CANCEL MODE (TABLE 4-15)
MENU DESCRIPTION
Print data that has been previously received, can be cleared. If the YES option is
selected, the print data will be deleted and then the printer will go offline. If the NO
option is selected, the printer will go offline without deleting data.
This menu screen allows the selection of whether to only delete the current print job or all that
have been received.
This screen confirms the received data has been deleted. Will display for 3 seconds, then the
printer will go offline.
DEFAULT SETTING MODE (TABLE 4-16)
MENU DESCRIPTION
Is the first menu screen of the printer’s Default Setting Mode. The Default Setting Mode allows
the printer to be reset to the programmed condition as received from the factory. This may include
all printer settings or just protocol.
The selection of YES confirms the operator wants to proceed and the selection of NO allows for
exit without default reset. If YES is selected, resetting will immediately begin.
This screen will only appear if PRINTER SETTING was selected from the first screen.
BOOT DOWNLOAD MODE (TABLE 4-14)
MENU DESCRIPTION
PROGRAM DOWNLOAD
SET CARTRIDGE
YES NO
PROGRAM DOWNLOAD
READY
PROGRAM
DOWNLOADING
PROGRAM DOWNLOAD
COMPLETED
PRESS ENTER
CANCEL PRINT JOB
YES NO
CANCEL PRINT JOB
CURRENT ALL
CANCEL PRINT JOB
COMPLETED
DEFAULT MODE
PRINTER SETTING
ALT. PROTOCOL
DEFAULT
PRINTER SETTING
YES NO