SATO 410 Printer User Manual


 
PIN SIGNAL DIRECTION PIN SIGNAL DIRECTION
1
STROBE To Printer 19 STROBE
Return
Reference
2 DATA 1 To Printer 20 DATA 1 Return Reference
3 DATA 2 To Printer 21 DATA 2 Return Reference
4 DATA 3 To Printer 22 DATA 3 Return Reference
5 DATA 4 To Printer 23 DATA 4 Return Reference
6 DATA 5 To Printer 24 DATA 5 Return Reference
7 DATA 6 To Printer 25 DATA 6 Return Reference
8 DATA 7 To Printer 26 DATA 7 Return Reference
9 DATA 8 To Printer 27 DATA 8 Return Reference
10
ACK To Host 28 ACK Return Reference
11 BUSY To Host 29 BUSY Return Reference
12 PTR ERROR To Host 30 PE Return Reference
13 SELECT To Host 31
INIT From Host
14
AUTOFD
(1)
To Host 32 FAULT To Host
15 Not Used 33 Not Used
16 Logic Gnd 34 Not Used
17 FG Frame Ground 35 Not Used
18 +5V(Z=24Kohm) ToHost 36
SELECTIN
(1)
From Host
(1) Signals required for IEEE 1284 mode.
IEEE 1284 Parallel Interface Pin Assignments
Section 5. Interface Specifications
Page5-49001069A SATOCTSeriesPrinters