Filter
Top Products
Media Size
Command Structure <ESC>A1aaaabbbb
aaaa = Vertical Media Size in dots (0 to Vmax)
bbbb = Horizontal Media Size in dots (0 to Hmax)
Example: <ESC>A108323200
Placement: Separate data stream to the printer.
Default: <ESC>A108323200 for CT400
<ESC>A108324800 for CT410
Command Function To set the size of the media.
Input to Printer:
<ESC>A
<ESC>A108323200
<ESC>Z
Printer Output: Ther is no printer output resulting from this command. It is used to
automatically adjust the offset values for the size of label being used.
Special Notes 1. The Base Reference point is always the on the right (looking at the
front of the printer) side of the print head. This command adjusts
the Base Reference Point to correspond with the right edge of the
loaded media.
2. If the label size is changed, then this command must be respecified
to center the print image on the label.
3. All eight variables (“aaaa” and “bbbb”) must be included in this
command.
Section 4. Programming Reference
Page 4-549001069A SATOCTSeriesPrinters