Copying
22
2
Copying from the Bypass Tray
Use the bypass tray to copy onto spe-
cial paper (OHP transparencies, label
paper, adhesive labels), thick paper
(postcards and thin paper), and copy
paper that cannot be loaded in the pa-
per trays.
Preparation
When copying from the bypass
tray, select [1 Sided→
→→
→ 1 Sided] for
copying in [Dup./Combine/Series].
You can change the initial settings.
⇒ p.99 “Duplex Mode Priority”
Important
❒ When paper larger than 433 mm in
size is used, it may become wrin-
kled, may feed into the machine, or
may cause jams.
❒ When copying onto special paper,
such as adhesive labels, be sure to
select “Face up” in ⇒ p.108 “Eject
Copy Face Up/Down in Bypass
Mode”. If you select “Face Down”,
a paper misfeed may occur.
Note
❒ The sizes of paper you can use
with the bypass tray are as follows.
❒ The machine can automatically de-
tect the following sizes as standard
size copy paper.
❒ If you want to use the size of paper
other than ones in the above table,
be sure to specify the size. ⇒ p.23
“When copying onto standard size
paper”, ⇒ p.79 “Program”
❒ When copying on OHP transpar-
encies or paper heavier than 105
g/m
2
(about 27.9 lb.), you need to
specify the paper type. ⇒”Paper
Type”in the General Settings
Guide
❒ If you want copies to be delivered
face down when placing originals
on the exposure glass, select “Face
down” for both ”Eject Copy Face
Up/Down in Glass Mode” and
“Eject Copy Face Up/Down in By-
pass Mode” of User Tools.
❒ If you have selected OHP transpar-
encies or thick paper paper in
“Special paper”, you cannot have
copies delivered face down.
❒ If you use label paper, you cannot
have copies to be delivered face
down.
❒ If you use paper larger than 432
mm, 17” in size, you cannot make
copies to be delivered face down.
❒ The maximum number of sheets
you can load into the bypass tray
depends on paper type. The num-
ber should not exceed the upper
limit.
Metric
version
• Vertical: 100 – 305 mm
• Horizontal: 139.7 – 600 mm
Inch
version
• Vertical: 3.9" – 12.0"
• Horizontal: 5.5" – 23.6”
Metric
version
A3L, A4L, A5L, 100 × 148
mm
Inch
version
A3L, 11" × 17"L, 8
1
/
2
" ×
14"L, 5
1
/
2
" × 8
1
/
2
"L, 100 ×
148 mm