Savin 2712 Scanner User Manual


 
Network Scanner
4
1
Names and Functions of Components
This section explains the names and functions of various controls used to oper-
ate the scanner.
Control Panel
This illustration shows the product with options installed.
1. {User Tools/Counter/Inquiry} key
Use to change default values or operation
parameters according to the operating
conditions.
2. Display
Shows operation status and various mes-
sages.
3. {Check Settings} key
Press to check the current settings.
4. {Reset} key
Use to cancel settings.
5. {Warmup} key
Press this key for about one second to be-
gin warm-up.
Pressing this key again while in warm-up
mode cancels warm-up.
Note
This key is inactive while scanning or
setting scanner default values.
6. Main power indicator
Lights up when the main power switch is
set to On.
7. Operation Switch
Pressing this switch turns the machine
on. The power indicator lights up. To
turn the machine off, press this switch
again.
Note
This key is inactive while setting scan-
ner default values.
8. Status indicators
Show the status of the various functions.
When lit green, the corresponding
functions is active.
When lit red, the corresponding func-
tion is interrupted. Press the respec-
tive key and follow the instructions
that appear on the display.