Copying from the Bypass Tray
61
2
Copying from the Bypass Tray
The optional bypass tray is required to use this function.
Use the bypass tray to copy onto spe-
cial paper (OHP transparencies, label
paper (adhesive labels), thick paper
(for example postcards and enve-
lopes), thin paper) , and copy paper
that cannot be loaded in the paper
trays.
Preparation
When copying from the bypass
tray, select [
1Sided
] for copying in
[
Dup./Combine/Series
](for example
[
1Sided
]→[
1Sided
] or [
2Sided
]→[
1
Sided
]).
Note
❒ The machine can automatically de-
tectthefollowingsizesasstandard
size copy paper.
❒ If you do not use the standard size
copy paper or if you use special pa-
per, you should input vertical and
horizontal dimensions. ⇒ p.22
“Copy Paper”,p.63“When copy-
ing onto custom size paper” The
sizes that you can input are as fol-
lows.
*1
Paper size up to 600mm(23.6") is
available when an optional HDD is
installed.
❒ When using paper larger than 433
mminsize,loaditsothatitisfed
straight into the machine.
❒ When paper larger than 433 mm in
size is used, the paper may become
wrinkled, may not be fed into the
machine, or may cause paper jams.
❒ The maximum number of sheets
you can load at the same time de-
pends on the paper type. For de-
tails about the paper capacity of
the bypass tray, ⇒ p.22 “Copy Pa-
per”.
❒ Some kinds of envelopes might
cause misfeeds and wrinkles. In
thiscase,pushdownthegreenle-
ver of the fusing unit. ⇒ p.65
“When copying onto envelopes”
Also,besuretoplacethefrontface
of the envelope downwards.
A
AA
A
Open the bypass tray.
Metric
version
A3
L
,A4
L
,A5
L
,8"× 13"
L
Inch
version
11" × 17"
L
,8
1
/
2
" × 14"
L
,
8
1
/
2
" × 11"
L
,5
1
/
2
" × 8
1
/
2
"
L
Metric
version
• Vertical: 90 – 305mm
• Horizontal: 148 – 432mm
*1
Inch
version
• Vertical: 3.6" – 12.0"
• Horizontal: 5.9" – 17.0"
*1
