Filter
Top Products
Original Orientation and Scan Area Setting
37
3
Original Orientation and Scan Area Setting
To correctly display the top/bottom
orientation of the scanned original on
a computer, original orientation and
page flow must be set when placing
the original.
When using the network delivery
scanner and Document Server, set-
tings are made on the control panel of
the machine. When using the ma-
chine as a network TWAIN scanner,
settings are made on the TWAIN
driver.
For a Network Delivery
Scanner and Document Server
A
On the Scanner Function screen,
press [Original Settings].
B
Make settings for original orien-
tation, 1 sided/2 sided combina-
tion, and mixed original sizes.
Note
❒ The initial values can be
changed under [Original Setting],
[Original Orientation Priority], or
[Mixed Original Sizes Priority] in
the Scanner Initial Setup. ⇒
p.18 “Making Scanner Settings”
1-sided original/2-sided original
selection
A When scanning one-sided orig-
inal, make sure that [2 Sided
Original] is not highlighted.
B When scanning two-sided orig-
inal, press [2 Sided Original] to se-
lect [T to T] or [T to B] according
to the binding orientation of
the original.
Orientation selection
A Press the key for the same ori-
entation as the actual orienta-
tion of the original ( or ).
Mixed size selection
A When originals of the same
width and different length are
placed, make sure that [Mixed
size] is highlighted.
Note
❒ If [Mixed size] is not set, the
scan size is set as the maxi-
mum size and a space is pro-
vided on the small original.
Top to top
original:
Top to bot-
tom original:
RS
RS
R
S
S
R