Troubleshooting
180
5
E
EE
E
Return the document feed sheet
to its original position.
F
FF
F
Close the document feeder (ADF)
cover until it clicks in position
and if necessary, close the docu-
ment feeder.
-
--
-To prevent originals
misfeeding:
Placing the following kinds of origi-
nals on the exposure glass may cause
misfeeds.
• Originals heavier than 128g/m
2
, 34 lb
• Originals lighter than 52g/m
2
, 14 lb
• Originals smaller than 148mm ×
210mm, 5.9" × 8.3"
• Originals larger than 297mm ×
864mm, 11.6" × 34.0"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased origi-
nals
• Originals with any kind of coating,
such as thermal fax paper, art pa-
per, aluminum foil, carbon paper,
or conductive paper
• Bound originals such as books
• Damaged originals
• Originals with glue on them
• Pasted originals
• Originals written in pencil
• Thin originals that have low stiff-
ness
• Originals with index tabs
• Transparent originals such as OHP
transparencies or translucent pa-
per
Note
❒ Do not mix different sizes of origi-
nals in the optional document
feeder.
❒ Remove staples or paperclips from
originals. Fan originals that have
had staples or paperclips removed.
❒ Do not stack originals above the
limit mark.
ZDCY100E