Filter
Top Products
Operation
16
1
Setting Up The Paper Delivery
Tray
A
AA
A
Raise the paper delivery tray
slightly, and then gently lower it
with your hand.
B
BB
B
Raise each paper delivery side
plate, and then grasp the side
plate knobs and move the paper
delivery side plates to match the
print paper size.
Note
❒ The inside of the plates should
correspond to the paper size.
When you use thick paper (128 g/m
2
to 209.3 g/m
2
, 34 lb to 55.6 lb)
A Adjust the side plates to match
the paper size scale on the
main frame side.
When you use standard paper
(47.1 g/m
2
to 105 g/m
2
, 12.5 lb to
28 lb)
A Adjust the side plates to match
the paper size scale on the end
plate side.
C
CC
C
Lower or lift the paper alignment
wings by turning the left and
right knobs.
Note
❒ When the guides are up, you
might not be able to load the
unit to full capacity (1,000
sheets) depending on the paper
you are using.
❒ Lift the paper alignment wings
if B5L prints are curled.
When you use 81.4 g/m
2
, 21.6 lb
or thicker paper
A
Lower the paper alignment wings.
When you use 81.4 g/m
2
, 21.6 lb
or thinner and B5 or smaller paper
A
Lower the paper alignment wings.
When you use 81.4 g/m
2
, 21.6 lb
or thinner and A4, 8
1
/
2
× 11" or
larger paper
A
Lift the paper alignment wings.
ZBHH050E
ZDZH180E