Filter
Top Products
KVM Switch KVM2132P, KVM2116P, KVM1116P User Manual 94
Ping
Check the network status of devices on the KVM switch installation with Ping.
1. Enter the IP Address or Host Name of the switch into the text entry box.
2. Click OK.
The ping results display in the Result panel.
Restore Values
Restore configuration changes made to the KVM switch to their original factory default values.
Clear Port Names. Removes names that have been assigned to the ports
Restore Default Values. Removes all changes made to the KVM switch (except for the Port Names),
including the Network Transfer Rate (on the Network page). The parameters return to the original
factory default settings.
Reset on exit
Place a check in the checkbox and click Apply to have the KVM switch reset itself and implement all the
new settings when you log out. (Wait approximately 30 to 60 seconds before logging back in.) If the
switch's IP Address is changed, the checkbox is automatically checked and the KVM switch will reset
when you log out. If the check mark is cleared before logging out, the changed IP settings will be ignored
and the original IP address settings will remain in effect.
Note: If the check mark was cleared, the changed IP settings are ignored, but still remain in
the network settings fields. The Reset on exit checkbox will automatically be enabled the
next time the page is opened. When the switch resets, the discarded IP settings will be used
by the switch. To avoid a problem, go to the network settings page and see that the correct IP
settings are in the fields.
The Download Tab
To download stand-alone AP versions of the Windows Client, the Java Client, and the Log Server to your
computer’s hard drive: