Filter
Top Products
54
MISFEED REMOVAL
When a misfeed occurs, the misfeed indicator ( ) and a misfeed location indicator ( ) will blink and the machine
will automatically stop.
Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.
MISFEED IN THE SPF (only on the SPF model)
1
Remove the misfed original.
Check sections A, B, and
C in the left shows the
illustration (see the next
page), and remove the
misfed original.
Section A
Open the feeding roller cover and remove the
misfed original from the document feeder tray.
Close the feeding roller cover.
Section B
Open the SPF and rotate the two release rollers
in the direction of the arrow to feed the original
out. Close the SPF and then remove the
original.
If a small original (eg. A5) is misfed, open the
right side cover and remove the original. Close
the right side cover.
The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the
machine, taking care not to touch the drum cartridge (the green part). Any scratches or damage to the surface of
the drum will cause dirty copies.
Note
(p.54)
(p.55)
(p.59)
AL-1644
(p.55)
AL-1633
Feeding roller cover
Roller
Right side cover
AL-1633_1644_EX.book 54 ページ ２００３年１０月２３日 木曜日 午後８時２１分