Sharp DM-4501 Printer User Manual


 
3-7
3
Setting items
Total count
The number of total printed pages in this product
can be displayed and printed.
The displayed or printed items vary with installation
of peripheral units.
Display contrast
Can be set if this product is equipped with a scanner
module as a peripheral unit.
This item is used to adjust the contrast of the touch
panel display.
List print
Test pages such as a list of setting items configured
in this product and a list of the resident fonts for
checking can be printed.
The types of test pages are shown below.
Setting list print
The settings in the printer feature are printed.
Printer test page
Demonstration page printing: Demonstration
pages contained in this product are printed.
PCL font list printing: A list of fonts that can be
used with the PCL printer drivers is printed.
PCL symbol set printing: A PCL symbol set list
is printed.
NIC page printing: A list of settings used by the
NIC (Network Interface Card), namely the print
server card (peripheral unit), is printed.
PostScript font list printing: A list of fonts that
can be used with the PostScript printer driver is
printed.
NOTE
If test page printing is disabled with key operator
program DISABLE TEST PAGE PRINTING (page
xx), the printer test pages cannot be printed.
Clock
The date and time of the built-in clock of this product
are set.
This setting is needed for date and time information
in E-mail delivery of information of this product (see
page xxxx), date print function in the copy mode
(see page xxxx), timer operations in the fax mode
(see page xxxx), and date and time information
recording of fax transmission and reception (see page
xxxx).
Tray settings
Paper type, paper size, operation mode, and use of
automatic tray switching are set for each tray.
The operation mode can be set when this product is
equipped with a scanner module as a peripheral unit.
If the product is not equipped with a scanner module,
use the item Auto tray switching described below
for setting the automatic tray switching function.
Auto tray switching
This item can be set if this product is not equipped
with a scanner module as a peripheral unit.
If the auto tray switching function is set and more
than one tray of the same paper size is installed in
this product, printing can be continued by switching
automatically the paper tray when paper of a tray
runs out. This item is used to enable the auto tray
switching function. If the product is equipped with a
scanner module as a peripheral unit, use the item
Tray settings to set this function.
CUSTOM SETTINGS