Filter
Top Products
1 – 3
UX-258TH
FO-475TH
[3] Transmittable documents
1. Document Sizes
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blue print)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents be-fore
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
Normal size
width 148 – 216 mm
length 140 – 297 mm
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. ADF 10 sheets
Special size: single sheet only (manual feed)
NOTES:
• When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in
feeder is being scanned.
• Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
• Readable width
210 mm, max.
• Readable length
This is the length of the document sent minus 4 mm from the top and
bottom edges.
Use document carrier sheet for smaller documents.
Readable width
Normal size
ADF 10
sheets
2.4 x 10
–3
–4.7 x 10
–3
inch
Thickness
Weight
0.15 x 10
–3
lbs/inch
2
Special size
Thickness
4.7 x 10
–3
–7.9 x 10
–3
inch
0.15 x 10
–3
–0.20 x 10
–3
lbs/inch
2
Weight
(Min.)
(Max.)
A4 size
(Max.)
140mm
297mm
600mm
148mm 216mm
[
Normal size
]
216mm
[
Special size
]
4mm
4mm
Readable length