Filter
Top Products
18
BEFORE USING THE MACHINE
2
Document cover (when installed)
Open to make a copy from the document glass.
Side cover
Open to remove misfed paper.
Side cover handle
Pull to open the side cover.
Bypass tray guides
Adjust to the width of the paper when using the
bypass tray.
Bypass tray
Special paper (heavy paper or transparency film)
can be fed from the bypass tray.
Bypass tray extension
Pull out when feeding large paper such as A3 and
B4 (11" x 17" and 8-1/2" x 14").
Toner cartridge lock release lever
To replace the toner cartridge, pull out the toner
cartridge while pushing on this lever.
Toner cartridge
Contains toner.
Document feeder tray (when the SPF/RSPF is
installed)
Place the original(s) that you wish to scan face up
here. Up to 40 sheets can be placed.
Original guides (when the SPF/RSPF is
installed)
Adjust to the size of the originals.
Feeding roller cover (when the SPF/RSPF is
installed)
Open to remove misfed originals.
Right side cover (when the SPF/RSPF is
installed)
Open to remove misfed originals.
Fusing unit release levers
To remove the paper misfed in the fusing unit, push
down on these levers and remove the paper.
Roller rotating knob
Rotate to remove misfed paper.
Exit area (when the SPF/RSPF is installed)
Originals exit the machine here after
copying/scanning when the SPF/RSPF is used.
Photoconductive drum
Images are formed on the photoconductive drum.
Fusing unit paper guide
Open to remove misfed paper.
19
20
21 22
23
24
2526
27
28 29
13
14
15
16
17
18
19
20
21
22
23
The fusing unit is hot. Do not touch
the fusing unit when removing
misfed paper. Doing so may cause a
burn or injury.
Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
The model name is on the front cover of the
machine.
24
25
Warning
26
27
28
Caution
29
Note