Filter
Top Products
37
REDUCING OR ENLARGING A COPY
There are three ways to enlarge and reduce copies:
• Automatic selection of a ratio according to the paper size: Auto ratio selection
• Specifying a ratio from 25% to 400%: Preset ratios/zoom
• Selecting the vertical and horizontal ratios separately: XY zoom
AUTOMATIC RATIO SELECTION
1
Place the original in the document
feeder tray or on the document glass.
The original size will appear in the display. If the
correct size does not appear, see "SELECTING THE
ORIGINAL SIZE" (p.35).
2
Press the [PAPER SELECT] key to
select the desired tray.
If the bypass tray is selected,
automatic ratio selection cannot
be used.
3
Press the [AUTO IMAGE] key.
• The copy ratio will be automatically set.
•
If the original and paper are in different orientations,
the image is automatically rotated to match the paper
orientation (rotation copy). However, if enlargement is
selected for copying onto a paper size larger than A4
(8-1/2" x 11"), the image will not be rotated.
• Rotation of the image can be disabled in the system
settings when reducing or enlarging a original.
(p.122)
• If the message "Image edge loss." is displayed, part
of the original image may be cut off.
4
Set the number of copies and press
the [START] key ( ).
• To cancel automatic ratio selection, press the [AUTO
IMAGE] key again.
• When copying from the SPF/RSPF, automatic ratio
selection mode will automatically disable after the
[START] key is pressed and the original is scanned.
When the SPF/RSPF is being used, the zoom copy ratio range is 50% to 200%.
Note
Automatic ratio selection can be used when
the original size is , A3, B4, A4, A4R, A5,
11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x
11", 8-1/2" x 11"R and 5-1/2" x 8-1/2". It
cannot be used for other sizes.
Note
COPY RATIO
ADDRESS
ADDRESS
EXPOSURE
COLOUR MODE
PROGRAM
PAPER SELECT
RESOLUTION
RESOLUTION
AUT
FO
BRO
COPY RATIO
ADDRESS
ADDRESS
DU
DU
2-S
CT
N
N
AUTO IMAGE
FORMAT
BROADCAST
OUTPUT
ORIGINAL SIZE
ORIGINAL SIZE
WXYZ