Filter
Top Products
7-70
SYSTEM SETTINGS
Contents
Detect Standard in Auto Colour
Mode
When the colour mode is set to auto in image send
mode, the discrimination point for detecting whether
originals are colour or black and white can be set to one
of 5 levels. To make it easier to detect a black and white
original, adjust the setting toward [Closer to B/W]. To
make it easier to detect a colour original, adjust the
setting toward [Closer colour].
Auto Switching of Finisher Trays
(When a finisher is installed.)
If the number of sheets on the upper finisher tray
reaches the sheet limit, output will automatically switch
to the lower tray.
Optimization of a Hard Disk
This function optimizes the hard drive of the machine by
defragmenting data. If a job is in progress, a message
will appear and optimization will not begin until the job is
finished. During optimization, the following operations
are not possible:
• Web page access, reception of print data
• Use of keys on the operation panel
• Turning off the power with the main power switch of
the machine.
• Auto Power Shut-Off
When optimization is completed, the machine will
automatically restart.
Clear All Job Log Data
This is used to clear the entire job log. (There is normally
no need to use this function.)
A log file is kept of jobs run on the machine. The job log
can be used to check general use of the machine. The
job log can be written to a computer in CSV format using
a Web browser.
When the document filing function is frequently used
and output of files seems somewhat slow, optimizing
the hard drive may improve performance.