Filter
Top Products
E-29
Basic Operation
2, 3
1, 4
Adjusting the Picture
You can adjust the projector’s picture to your prefer-
ences with the following picture settings. To save the
settings, select a memory from 1 to 5 and OFF (see
page 32) and then adjust the settings.
Description of Adjustment Items
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
Selected item
For more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
button button
For selecting a desired item from six color temperature
settings
For selecting a desired item from four gamma positions
For switching “on” or “off” the function that emphasizes
bright portions of the image
For storing all items set in “Picture”
All image adjustment items are returned to the factory
preset settings.
Contrast
Brightness
Color
Tint
Sharp
Red
Blue
CLR Temp
Gamma
White Emphasis
Picture Setting
Reset
On-screen Display
e. g. (VIDEO input in INPUT 3 or 4 mode)
1
2
•“Color”, “Tint” and “Sharp” do not appear for RGB input in
INPUT 2 mode.
• For details on “Gamma”, see “Gamma Correction
Function” on page 31.
• For details on “CLR Temp”, see “Adjusting the Color
Temperature” on page 30.
• For details on “White Emphasis”, see “Description of
White Emphasis” on page 30.
• For details on “Picture Setting”, see “Picture Setting
Function” on page 32.
1 Press MENU. The “Picture” menu screen appears.
2 Press / to select a specific adjustment item.
3 Press / to move the mark of the selected
adjustment item to the desired setting.
4 To exit the menu screen, press MENU.
• To reset all adjustment items, select “Reset” on the “Picture”
menu screen and press ENTER.
•“Tint” cannot be used with PAL, SECAM, PAL-M, PAL-N or
PAL-60.
•“Contrast”, “Bright”, “Color”, “Tint” and “Sharp” cannot be
used in the DIGITAL INPUT mode.
DT-200(E)#p26_32.p65 02.11.21, 11:38 AM29