Sharp PG-C45X Projector User Manual


 
-60
Color Management System (C. M. S.)
Selecting the Color
Reproduction Mode
Select “Color Selected” in the “C.M.S.”
menu on the menu screen.
For operating the menu screen, see
pages 42 to 45.
Note
For additional information about sRGB
function, visit “http://www.srgb.com/”.
“sRGB” cannot be selected for “Color Se-
lected” on the C.M.S. menu when “Com-
ponent” is selected for “Signal Type” on
the “Picture” menu.
When “sRGB” is selected;
The gamma correction cannot be set.
“Red”, “Blue” or “CLR Temp” in “Picture”
cannot be adjusted.
If “Standard” or “sRGB” is selected for
“Color Selected”, other items (e.g., Target)
cannot be adjusted.
Info
When “sRGB” is selected, the projected
image may become dark; however, this
does not indicate a malfunction.
Selecting the Target
Color
Select Target in the C.M.S. menu on
the menu screen.
For operating the menu screen, see
pages 42 to 45.
This function allows you individually adjust the display characteristics of six colors (R: Red,
Y: Yellow, G: Green, C: Cyan, B: Blue, M: Magenta) .
Red Cyan
Yellow Blue
Green Magenta
-60
Description
Sharp default setting
“Lightness”, “Chroma” and “Hue” can
be adjusted for each of the six colors.
The mode changes to sRGB
Selected item
Standard
Custom 1-3
sRGB