Sharp PG-C45X Projector User Manual


 
Easy to Use Functions
-75
Setting the Anti-Theft
The anti-theft function prevents unauthorized use of the projector. You can choose to use
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the anti-theft function is activated, users will need to enter the correct keycode each
time the projector is turned on. Failure to enter the correct keycode will cause images not to
be projected. The following procedures explain how to use this function.
Entering the Keycode
Anti-Theft cannot be selected unless
Password is set. (See page 73.)
When Anti-Theft is selected, the password
input box will appear. Enter the keycode af-
ter the right password is entered.
Select Anti-Theft in the Options (2)
menu on the menu screen.
For operating the menu screen, see
pages 42 to 45.
Info
Once the function is activated, you must
remember the correct keycode. We sug-
gest you record the keycode in a safe
place where only authorized users have
access. If you lose or forget your keycode,
you will need to contact your nearest
Sharp Authorized Projector Dealer or Ser-
vice Center (see page 96). You may need
to bring your projector to them to restore
the projector to original factory condition
(password and keycode reset).
1 Press any button you like on
the remote control or projec-
tor to set the first digit in New
Code.
Note
The following buttons on the remote
control and projector cannot be set
as keycodes:
POWER (ON/OFF) buttons
ENTER button
UNDO button
MENU button
FORWARD button
BACK button