Sharp PG-C45X Projector User Manual


 
-66
Setting the Video System
Setting the Video
System
Select Video System in the Options
(1) menu on the menu screen.
For operating the menu screen, see
pages 42 to 45.
Note
The video signal can only be set in IN-
PUT 3 or INPUT 4 mode.
In Auto, images are displayed in PAL
even if PAL-N or PAL-M input signals are
received.
When connected to PAL video equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video equipment.
PAL
SECAM
NTSC4.43
NTSC3.58
The video input system mode is preset to Auto; however, a clear picture from the con-
nected audio-visual equipment may not be received, depending on the video signal differ-
ence. In that case, switch the video signal.
-66