Filter
Top Products
-72
Canceling the Keylock
Setting
When the Keylock Level is set to “Normal”,
all buttons are functional.
Select “Keylock Level” in the “Options
(2)” menu on the menu screen and set
“ Normal”
.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•When a password has been set, and
“Keylock Level” is selected, the password
input box will be displayed.
•If both a password and the Keylock Level
have been set at the same time, the pass-
word will be necessary before changing
the Keylock Level.
Selecting the Transmission Speed (RS-232C)
This menu allows you to adjust the transmission speed of the RS-232C connection by select-
ing the baud rate.
Selecting the Transmis-
sion Speed (RS-232C)
Select “RS-232C” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages 42 to 45.
Note
•When a password has been set, and “RS-
232C” is selected, the password input box
will be displayed.
•Make sure that both the projector and
computer are set for the same baud rate.
Refer to the computer’s operation manual
for instructions for setting the computer’s
baud rate.
-72
Locking the Operation Buttons on the Projector