-20
Image Projection
Displaying the Black
Screen and Turning off
the Sound Temporarily
Press on the remote control to
temporarily display a black screen
and turn off the sound.
Note
•Pressing again will turn the projected
image and sound back on.
Correcting Trapezoidal
Distortion
When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted trapezoidally.
The function for correcting trapezoidal distortion
is called Keystone Correction.
Note
•The Keystone Correction can be adjusted
up to an angle of approximately ±35 degrees
and the screen can also be set up to an
angle of approximately ±35 degrees (when
the resize mode is set to “NORMAL” (see
page 26)).
•The Keystone Correction cannot be ad-
justed in the lateral direction.
1 Press to enter the Key-
stone Correction mode.
•You can also use on the projector.
AV MUTE button
"On-screen display (Keystone Correction mode)
'
,
"
,
\
,
|
buttons
KEYSTONE
button
UNDO
button