Filter
Top Products
-42
Video System (Setting the
Video System)
The video input system mode is preset to “Auto”;
however, a clear picture from the connected au-
dio-visual equipment may not be received, de-
pending on the video signal difference. In that
case, switch the video signal.
Select “Video System” on the “Options” menu
and the appropriate video system.
Setting the menu screen Page 34
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Description of Video Systems
Note
•The video signal can only be set in INPUT 2 or
INPUT 3 mode.
•When the system mode is set to “Auto”, you
may not receive a clear picture due to signal
differences. Should this occur, switch to the
video system of the source signal.
Background (Selecting a
Startup and Background Image)
Select “Background” on the “Options” menu and
the image displayed upon the projector’s startup
and when no signal is being sent to the projec-
tor.
Setting the menu screen Page 34
Example: “Options” menu screen for
INPUT 2 (S-Video) mode
Description of Background Images
Note
•If the input signal has interference, the screen
will be displayed during interference.
Selectable settings
PAL
SECAM
NTSC4.43
NTSC3.58
Description
When connected to PAL video
equipment.
When connected to SECAM video
equipment.
When reproducing NTSC signals in
PAL video equipment.
When connected to NTSC video
equipment.
Selectable settings
Sharp
Blue
None
Description
SHARP default image
Blue screen
Black screen
Using the “Options” Menu
Sharp
Blue
None