Filter
Top Products
Maintenance
128
Scanning glass and rollers
Clean the scanning glass and rollers frequently to ensure the quality of
transmitted images and copies. Open the operation panel (grasp the
finger hold and pull up), and wipe the scanning glass and rollers with
a soft cloth.
♦
Make sure that all dirt and stains (such as correcting fluid) are
removed, as dirts and stains will cause vertical lines on transmitted
images and copies.
♦
Adhesive cellophane tape is useful for removal of debris from the
rollers.
Document
rollers
Scanning glass
Caution:
When
wiping, take care not
to damage any of the
protruding parts on
the underside of the
operation panel.
The housing
Wipe the external parts and surface of the machine with a dry cloth.
Caution!
♦
Do not use benzene or thinner. These solvents may damage or dis-
color the machine.
all-ux340L.book Page 128 Thursday, December 23, 1999 5:37 PM