Sharp UX-340L Fax Machine User Manual


 
Setting Up and Using OpenLCR
36
Registering by fax
To register by fax, fill in the
Fax Transmission Test and OpenLCR
Line Activation Form
, and then fax the form as follows:
1
Place the form with the side you
wrote on face down, and push it
gently into the document feeder of the
fax machine.
The display will show:
READY TO SEND
2
Press the
OpenLCR
key, the
5
key,
and then the
START/MEMORY
key.
Your fax automatically calls
OpenLCR and sends the form. After
the form is sent, your fax will
automatically receive the rate data.
This lasts one or two minutes. When
downloading is completed, the display
will briefly show DOWNLOAD OK!!
and then revert to the date and time.
Your fax will print out the registration
form to confirm that it was received.
OpenLCR will also program the date
and time and your fax number in your
fax machine.
OpenLCR
START/MEMORY
5
fax that it must receive new rate data, and old, incorrect data will
continue to be used.
Please note that the agreement you enter into by registering is
between you and OpenLCR; it is not between you and any carriers.
all-ux340L.book Page 36 Thursday, December 23, 1999 5:37 PM