Filter
Top Products
Making Telephone Calls
85
6. Making
Phone Calls
Comments:
♦
While the handset of the fax is lifted (off hook), an extension phone
connected directly to the fax cannot be used to speak with the other
party.
♦
The fax may interrupt a voice call received on an extension phone if
the reception mode is set to A.M. and there is a period of silence
during the conversation. If you are on a touch-tone phone, you can
prevent this by pressing any three keys on the phone immediately
after you answer. (Note: Do not enter the code to activate fax
reception: 5,
*
,
*
.)
Chain Dialing
After lifting the handset, you can dial any combination of Normal
Dialing, Rapid Key Dialing and Speed Dialing numbers. For example,
if you have stored an area code or an access code for a special service
in a Rapid Key, you can press the Rapid Key for that area code or
access code, then dial the remainder of the number by pressing a
Rapid Key, pressing number keys, or pressing the
SPEED DIAL
key
and entering a two-digit Speed Dial number.
Searching for an auto-dial number
You can use the
HOLD/SEARCH
key to search for a Rapid Key or
Speed Dial number. First search for the number as described in
Searching for an auto-dial number
on page 68, then pick up the
handset or press the
SPEAKER
key. The number will be dialed
automatically (do not press the
START/MEMORY
key).
Redial
The last number dialed can be redialed by pressing the
REDIAL
key
(it is not necessary to pick up the handset or press the
SPEAKER
key). When the other party answers, pick up the handset to talk.
all-ux340L.book Page 85 Thursday, December 23, 1999 5:37 PM