Filter
Top Products
Caller ID
97
8. Special
Functions
2
Press
1
to enter a number, or
2
to clear
a number. (If you pressed
2
, go to
Step 4.)
3
Enter the phone number, including the
area code, by pressing the number
keys (max. of 20 digits).
1 2
or
SET CLEAR
3
2 2 4 5 6
7
4 2 5
4
Press the
START/MEMORY
key
and then the
STOP
key.
Blocking voice calls
With Caller ID turned on, you can use the Anti Junk Fax function
described in
Blocking Reception of Unwanted Faxes
in this chapter to
block voice calls as well as fax receptions (the Anti Junk Fax function
normally only blocks faxes).
In this case, when a voice call or a fax transmission comes in from a
number you have specified as a "Junk Number", your fax will break
the connection as soon as it receives the calling phone number from
the caller ID service (before the second ring).
To use this function, turn on the Anti Junk function and then enter the
number in the Anti Junk Number List as explained in
Blocking
Reception of Unwanted Faxes
in this chapter (see page 107).
Note: This function cannot be used if you are using the Distinctive Ring
function.
(Example)
START/MEMORY
STOP
all-ux340L.book Page 97 Thursday, December 23, 1999 5:37 PM