Filter
Top Products
UX600MU-IPSN
RT
<P=001>
Entering Your Name and Fax Number
To have your name and fax/telephone number printed at the top of every page
you transmit, program them by pressing the panel keys as shown below.
♦ You must program your name and fax number in order to comply with the
Consumer Protection Act of 1991 (see inside of front cover).
♦ If you make a mistake, press the HOLD/SEARCH key to move the cursor
back to the mistake, then enter the correct number or letter. (To move the
cursor forward, press the SPEAKER key.)
1
Press the FUNCTION key and then the
"3" key. ENTRY MODE will appear in
the display.
FUNCTION
3
2
Press the "#" key two times.
OWN NUMBER SET will appear in the
display.
3
Press the START key.
4
Enter your fax number (max. of 20 dig-
its) by pressing the number keys. (To in-
sert a space between digits, press the "#"
key. To insert a "+", press the " " key.)
(Example)
5
Press the START key.
6
Note that there are letters marked above
each of the number keys. Enter your
name by pressing the appropriate num-
ber key for each letter several times until
the letter appears in the display. (Max. of
24 characters.) For example, to enter "S"
press "7" five times. See the following
page for more details.
(Example: SHARP)
7
Press the START key and then the
STOP key.
STOP
7 7
5
5
4
3
2
1
START
7 7 7 7
4 4 4
2
2
7 7 7 7
SPEAKER
7
5
START
START
(Move cursor)
S:
H:
A:
R:
P:
Chapter 2 Initial Settings
18