Filter
Top Products
(Example)
or
<P=002>
3
Set the time in seconds by entering a two-
digit number from "01" to "10" (enter
"01" for one second, "02" for two sec-
onds, etc.). To turn off the function, enter
"00".
• Note: We recommend that you do not
set Quiet Detect Time below three sec-
onds.
4
Press the STOP key to return to the date
and time display.
Fax reception when the answering machine fails
When this function is turned on, your fax will answer the call after five rings if
the answering machine for some reason fails to answer before that time. This en-
sures that you will receive fax messages even if the answering machine’s tape
fills up or the answering machine is not turned on.
This function has been turned off at the factory. If you want to turn it on, follow-
ing the steps below.
Note: When this function is turned on, make sure that the answering machine
is set to answer on four rings or less. If it isn’t, the fax will always answer
first, preventing callers from leaving voice messages.
1
Press the FUNCTION key and then the
"4" key. OPTION SETTING will appear
in the display.
2
Press the " " key eight times.
FAX RX TAD FAILS will appear in the
display.
3
Press "1" to turn the function on, or "2"
to turn it off.
4
Press the STOP key to return to the date
and time display.
STOP
FUNCTION
4
1
STOP
2
40
Chapter 7 Answering Machine Hookup
57