Filter
Top Products
<P=003>
Optional Transmission Settings
If desired, there are several transmission settings which are possible before dial-
ing and transmitting the document.
Note: To make the settings, the document must first be loaded in the feeder.
Resolution
Your fax has 4 resolution settings. If you do not make a setting, the fax will auto-
matically send the document in STANDARD resolution.
STANDARD: Use STANDARD for ordinary documents. This setting
gives you the fastest and most economical transmission.
FINE: Use FINE for improved reproduction, especially with
documents containing small letters or fine drawings.
SUPER FINE: Use SUPER FINE when you need the highest quality of
reproduction.
HALF TONE: Use HALF TONE for photographs and illustrations. The
original will be reproduced in 64 shades of gray.
Note: In order to transmit in SUPER FINE resolution, the receiving fax ma-
chine must also have that resolution. If it doesn’t, your fax will automatically
step down to the next best available setting.
Contrast
The contrast is normally set to AUTO, which means that the fax automatically
controls the contrast, but for faint documents you can change the setting to
DARK.
Setting the resolution and contrast
Press the RESOLUTION key one or
more times until the desired resolution
and contrast settings appear in the display.
• The first time you move through the list
of resolution settings, the contrast set-
ting AUTO will appear next to each
resolution setting. The second time you
move through the list, the contrast set-
ting DARK will appear.
RESOLUTION
Chapter 3 Sending Documents
34