Filter
Top Products
<P=002>
Being polled (polling standby)
To let another fax machine poll your fax, simply set the reception mode to
AUTO, and load the document(s) to be sent.
Transmission will take place when the other fax machine calls your fax and acti-
vates polling. Automatic reception is possible whilst your fax is on polling
standby.
Polling security
Polling Security allows you to prevent unauthorized polling of your fax. When
this function is turned on, polling will only take place when the fax number of
the polling fax machine has been entered in your fax’s list of permitted fax num-
bers (called "passcode numbers"). The number of the polling fax must also be
correctly programmed into itself for identification.
To use Polling Security, follow the steps below to turn the function on, and then
enter permitted numbers as shown on the following page.
1
Press the keys shown at right.
ENTRY MODE will appear in the dis-
play.
2
Press the "#" key three times.
SECURITY SELECT will appear in the
display.
3
Press "1" to turn polling security on, or
"2" to turn it off.
FUNCTION
3
1
2
or
4
Press the START key and then the
STOP key.
START
STOP
Chapter 8 Special Functions
65