Filter
Top Products
38
Operating with the Remote Control (Continued)
Switching the Iris Setting
This function controls the quantity of the
projected light and the contrast of the
image.
Press IRIS 1 or 2.
Each time the button is pressed while the display
is on, the mode changes in the following order:
IRIS 1
High Brightness High Contrast
IRIS 2
Of
f
On
For details, see page 45.•
Note
Auto Sync
(Auto Sync Adjustment)
Auto Sync function works when detecting
input signal after the projector turns on.
Press AUTO SYNC to manually adjust
with Auto Sync function.
When the optimum image cannot be achieved
with Auto Sync adjustment, use manual
adjustments. (See page
49.)
•
Note
•
■
■
Hiding the Menu Temporarily
(Menu Hide)
When the menu screen is displayed, you
can temporarily hide the menu screen by
pressing and holding MENU HIDE on the
remote control. This is useful when, for
example, checking the video adjustment
information.
Switching the Eco+Quiet Mode
Press ECO+QUIET to switch the
Eco+Quiet mode between on and off.
When the Eco+Quiet Mode is set to “On”, the
sound of the cooling fan will turn down, the power
consumption will decrease, and the lamp life will
extend.
Refer to “Eco+Quiet” on page 45 for details.•
Note
•