Filter
Top Products
66
Attaching the Nose Pad
Attach either of the supplied nose pads
as needed (such as when the glasses do
not fi t properly). The glasses come with a
large and small nose pad.
2
1
1
Attaching the
nose pad
Removing
the nose pad
Attaching the 3D Glasses Band
Attach the supplied 3D Glasses band
strap as needed (such as when the
glasses do not fi t properly).
Insert the ends of the 3D Glasses into the
3D Glasses band until they are secure.
Pull the cord stopper on the strap to adjust the
strap length.
•
Using the 3D Glasses
Turning On/Off the Power
Turn on the power of the 3D Glasses.
Press the power button for at least 2 seconds.
The LED light blinks 3 times.
Turn off the power on the 3D Glasses.
Press the power button for at least 2 seconds.
The LED light lights for 2 seconds.
When the battery power is low, the LED light
blinks 6 times after the power is turned on.
•
Note
Switching to 3D and 2D Mode
When viewing 3D images, you can press
the power button to switch between 2D
and 3D modes. This is useful when
several people are viewing the same 3D
images with some people wanting to
watch in 3D and some people wanting to
watch in 2D.
Viewing 2D images
When you press the power button twice while
viewing 3D images, the LED light blinks 2 times
and the 3D images switch to 2D images.
Viewing 3D images
When you press the power button twice while
viewing 2D images, the LED light blinks 3 times
and the 2D images switch to 3D images.
•
•
•
•
•
•
Enjoying 3D Image Viewing (Continued)