Filter
Top Products
67
Useful
Features
Connecting the IR Emitter to the Projector
1
Install the IR emitter unit to the
stand.
2
Insert the IR emitter cable to the
unit.
3
Connect the IR emitter and the
projector.
4
Position the IR emitter.
3D images are intended to be viewed while
facing the screen from the front.
Position the IR emitter so that the 3D
Glasses can easily receive the infrared
signals while viewing the screen from the
front.
Do not install in a location where objects
may obstruct the infrared signals between
the IR emitter and 3D Glasses.
Adjust the angle of the IR emitter to suit
your viewing location.
•
•
•
•
1
Fasten
Loosen
Fasten
Loosen
2
3
To 3D SYNCHRO terminal
IR emitter cable
To 3D SYNCHRO terminal
IR emitter cable
4
When you connect the IR emitter, make sure the power is turned off.
The supplied IR emitter is exclusively designed for this projector. Do not connect it to other equipment.
•
•
Note