Filter
Top Products
Installation Guide
30 2130163
To install the AirCard, your CE device must have these
resources:
Determining your version of Windows CE
Pocket PC users: If you do not know what version of
Windows CE you are using, on the device:
1. Select
Start > Settings
2. Tap the System tab
3. Tap the
About icon.
· “
Windows 4.20.1081 (Build…)” indicates that your
operating system is Pocket PC 2003
· “
Windows 3.0.11171 (Build…)” indicates that your
operating system is Pocket PC 2002
· “
Windows 3.0.9348 (Build…)” indicates that your operating
system is Pocket PC
Note: ActiveSync is made by
Microsoft and is included with
PCs running Windows CE. (It is
also available from the Microsoft
web site.) ActiveSync 3.5 is
supported on Windows 98, 2000,
XP, and NT 4.0 with Service
Pack 6 or later. ActiveSync 3.7 is
supported on Windows 98 SE,
2000, Me, NT, and XP.
ActiveSync installation requirements
The host PC (the desktop or notebook PC to which you install
the software) must have:
• A CD-ROM drive
• ActiveSync version 3.5 or 3.7 installed.
Note: If you are using Pocket PC 2003 or Windows CE .NET, you
need ActiveSync 3.7 or later.
If you are using Pocket PC or Pocket PC 2002, you need ActiveSync
3.5 or later.
You must also have the ability to establish a connection
between the CE device and host. This could be:
• A cable connection using either a USB or serial cable
(requiring the cable and that the CE device and host have
the necessary connectors)
• An infrared connection (requiring that both the CE device
and host have infrared ports).
Table 4-1: CE Device Resource Requirements
Card Slots 1 Type II PCMCIA (PC Card) Slot
(An accessory pack on Pocket PCs)
Memory 900 kB