Filter
Top Products
Fax Configuration
Rev 3.5 Feb.05 55
13. Beside the Flow Control option, enter:
·
AT+FCLASS=2.0;+FLO=2
14. Ensure that the Use hardware flow control box is checked.
15. Click
OK in the Properties window.
Receive and Dialing Setup
16. Click the
Receive Setup button.
17. Check the box beside
Automatically answer incoming calls and
set the application to answer after
2 rings.
18. Click
OK.
Note: To determine the
modem’s phone number, launch
Watcher and choose HELP >
About. (Admin >About on
Pocket PCs)
19. Click Dialing Setup, then select the Location tab.
20. Ensure that the phone number for the modem is entered
into the appropriate fields. Click
OK.
21. Choose
OK again, then Close.
The modem is now configured for sending faxes. See the
section below for setting the modem to receive a fax.
Note: After configuration, if the AirCard is not inserted when
WinFax PRO is launched, the WinFax settings for the AirCard are lost
and you must re-enter them.
Receiving faxes
Note: The CDMA network
requires that you pre-configure
the modem for answering a fax
call before the call rings.
To receive faxes successfully, you must set the AirCard to
receive incoming calls as fax calls, not data or voice. To do so:
1. Start the Watcher software from the Windows Start menu
or the desktop icon.
2. Select
TOOLS > Options to open the Options window.
3. Select the
Network tab of the Options window.
4. Use the
Incoming Calls: Answer drop-down menu to select
one of:
·
next call as Fax
· all calls as Fax
5. Click OK to save the setting.
6. Start WinFax and wait for the incoming call.
Note: Watcher reverts to answer all calls as voice whenever it is
started.