Filter
Top Products
Installation on Devices Running Windows CE
Rev 3.5 Feb.05 33
Inserting the AirCard into a
Pocket PC
Note: If you also use the
AirCard 300 with your computer,
eject the AirCard 300 before you
use the AirCard 555.
The Pocket PC operating system doesn’t allow two network
devices to be simultaneously inserted into PC Card slots. If
you are using a PCMCIA jacket that has two slots, ensure the
second slot does not contain another network interface card
when you use the AirCard.
To insert the AirCard into a Pocket PC:
1. If the PCMCIA jacket accessory is not already attached,
slide the Pocket PC bottom first into the jacket. It should
click into place.
2. Attach the antenna to the circular gold connector on the
end of the AirCard. DO NOT FORCE.
Note: On Pocket PCs, anytime
you eject and re-insert the
AirCard, restart your Pocket PC
by turning it off and on again.
3. With the label facing towards the front of the Pocket PC,
insert the AirCard into the slot at the top of the jacket.
Inserting the AirCard into a
Handheld or Tablet PC
To insert the AirCard into a Handheld or Tablet PC:
Note: If you also use the
AirCard 300 with your computer,
eject the AirCard 300 before you
use the AirCard 555.
1. Attach the antenna to the circular gold connector on the
end of the AirCard. DO NOT FORCE.
2. With the label facing towards the front of the Pocket PC,
insert the AirCard into the slot.
3. If your device is not plugged into a power supply, the
prompt, “Do you want to use this PC card on battery
power?” appears. Tap
Yes.