Filter
Top Products
-
20 -
Setting Paper roll
(1) Press the paper cover open button to open the paper cover in the direction of the
arrow.
(2) Install the paper roll to the paper holder and make sure that the tip of the paper 5 cm
or longer appears from the paper outlet and straighten the paper setting.
(3) Certainly press both sides of the paper cover to set the printer.
(4) If the paper roll with mark is used, press the FEED switch once for feeding to home
position.
NOTE
- DO NOT block the paper outlet or hold the paper that is being loaded.
Otherwise, it may cause a paper jam.
- DO NOT touch the platen roller or the printer gear. If doing so, it may
cause printer poor quality or printer malfunction.
HINT
• When using the printer with the label that is in the thermal head and
platen roller for a long time, it may cause paper feeding error. Open and
close the paper cover to release the thermal head and label, and then
press the FEED switch to feed the label home position before using.
Certainly press both sides of the
p
a
p
er cover to set the
p
rinter.